Nanoparticle‐embedded polymer‐dispersed liquid crystal for paper‐like displays

Abstract— A polymer‐dispersed liquid‐crystal (PDLC) matrix template embedded with nano/microparticles can be backfilled/infiltrated with a dye‐doped liquid crystal for a paper‐like reflective display. In this way, a desirable degree of diffusion can be realized to reduce the viewing‐angle dependency of a gain reflector and metallic glare without changing other electro‐optical properties.     

Decentralized PD control for non-uniform motion of a Hamiltonian hybrid system

In this paper, a decentralized proportional-derivative （PD） controller design for non-uniform motion of a Hamiltonian hybrid system is considered. A Hamiltonian hybrid system with the capability of producing a non-uniform motion is developed. The structural properties of the system are investigated by means of the theory of Hamiltonian systems. A relationship between the parameters of the system and the parameters of the proposed decentralized PD controller is shown to ensure local stability and tracking performance. Simulation results are included to show the obtained non-uniform motion.     

Lyapunov function-based obstacle avoidance scheme for a two-wheeled mobile robot

An obstacle avoidance scheme of a two-wheeled mobile robot is shown by selecting an appropriate Lya- punov function. When considering the obstacle, the Lyapunov function may have some local minima. A method which erases the local minima is proposed by using a function which covers the minima with a plane surface. The effectiveness of the proposed method is verified by numerical simulations.     

The electrooxidation of sulfur-containing compounds at boron-doped diamond electrode

The electrooxidation of homocysteine, glutathione (GSH), 2-mercapto ethanesulfonic acid and cephalexin at boron-doped diamond (BDD) electrodes and glassy carbon (GC) electrodes was investigated by cyclic voltammetry. The oxidation of these sulfur-containing compounds exhibited well-defined irreversible responses. This preliminary study has shown that BDD has better sensitivity than GC. Concentration dependence has been studied and indicated the promise of using BDD electrodes for quantitative determination. All of the compounds displayed recognizable oxidation peaks at BDD electrodes at millimolar concentration levels. Scan rate dependence of GSH has been examined. It was shown that there was no adsorption on the surface of the BDD electrode for the low concentration.     

An adaptive associative memory system based on autonomous reaction between image memories

To construct a “thinking-like” processing system, a new architecture of an adaptive associative memory system is proposed. This memory system treats “images” as basic units of information, and adapts to the environment of the external world by means of autonomous reactions between the images. The images do not have to be clear, distinct symbols or patterns; they can be ambiguous, indistinct symbols or patterns as well. This memory system is a kind of neural network made up of nodes and links called a localist spreading activation network. Each node holds one image in a localist manner. Images in high-activity nodes interact autonomously and generate new images and links. By this reaction between images, various forms of images are generated automatically under constraints of links with adjacent nodes. In this system, three simple image reaction operations are defined. Each operation generates a new image by combining pseudofigures or features and links of two images. This work was presented, in part, at the Fourth International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–22, 1999     

Effects of 4He impurities on 3He nuclear spin-lattice relaxation in hcp solid 3He

Nuclear spin-lattice relaxation properties of hcp solid ³He with ⁴He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the ⁴He-⁴He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T ^–n with n = 7.4±0.3.     

Dielectric Dispersion of Polycrystalline Aluminum Nitride at Microwave Frequencies

Complex permittivity of polycrystalline AlN was measured over the frequency range 100 MHz to 13 GHz using reflection coefficient and cavity resonator methods. Dielectric relaxation peaks of loss tangent were observed in the frequency range 200 MHz to 3 GHz. The maximum value of loss tangent was ∼200 × 10⁻⁴. Relative permittivities decreased by ∼4% with increased frequency at the region of relaxation peaks. It was shown that these dispersion frequencies were inversely proportional to the grain sizes of AlN and independent of purities and processes. Model calculations for elastic vibration of a single-crystal grain of AlN were performed to investigate the origin of the dielectric dispersion due to piezoelectric effect. The calculated results of elastic sphere and 14-faced-polyhedron models showed a good quantitative agreement with the observed dispersion frequencies, which suggested that the dispersion was due to a piezoelectric vibration of a single grain of AlN ceramics at microwave frequencies.     

Effects of heated seats in vehicles on thermal comfort during the initial warm-up period

Eight subjects participated in a subjective experiment of eight conditions to investigate the effects of heated seats in vehicles on skin temperature, thermal sensation and thermal comfort during the initial warm-up period. The experimental conditions were designed as a combination of air temperature in the test room (5, 10, 15, or 20 °C) and heated seat (on/off). The heated seat was effective for improving thermal comfort during the initial warm-up period when air temperature was lower than 15 °C. Use of heated seats prevented decreases in or increased toe skin temperature. Heated seats also increased foot thermal sensation at 15 and 20 °C. Optimal thermal sensation in contact with the seat was higher when air temperature was lower. Optimal skin temperature in contact with the seat back was higher than that with the seat cushion. Moreover, these optimal skin temperatures were higher when air temperature was lower.     

A coaxial pulsed plasma thruster using chemical propellants

Pulsed plasma thrusters (PPTs) have the advantages of mechanical simplicity and robustness compared to other electric propulsion systems. However the thrust power ratio of PPTs is lower than that of other electric propulsion systems. To enhance the thrust performance of the PPT, we propose to use several combustible solid chemicals as coaxial PPT propellants to replace Teflon^® (Polytetrafluoroethylene: PTFE). With the design, the force obtained thermodynamically is expected to augment the PPT thrust power ratio with the help of the chemical energy contained in the propellants. As a result, the thrust power ratio is increased using hydroxyl-terminated polybutadiene-ammonium perchlorate (HTPB-AP)-based propellants compared to the case of ordinary Teflon. The discharge current and voltage waveform does not change even when the propellant is changed. These findings could indicate that the impulse bits by gasdynamic contribution are lager in the case of chemical solid propellants than in the case of Teflon.     

Magnetization Reversal by Electrical Spin Injection in Ferromagnetic (Ga,Mn)As-Based Magnetic Tunnel Junctions

We report current-induced magnetization reversal in a ferromagnetic semiconductor-based magnetic tunnel junction (Ga,Mn)As/AlAs/(Ga,Mn)As prepared by molecular beam epitaxy on a p-GaAs(001) substrate. A change in magneto-resistance that is asymmetric with respect to the current direction is found with the excitation current of 10⁶ A/cm². Contributions of both unpolarized and spin-polarized components are examined, and we conclude that the partial magnetization reversal occurs in the (Ga,Mn)As layer having smaller magnetization with the spin-polarized tunneling current of 10⁵ A/cm².